IJICS
ISSN NO: 0972-1347
INTERNATIONAL JOURNAL OF INFORMATION AND COMPUTING SCIENCE
IMPACT FACTOR - 5.2
Thomson Reuters' Research ID : H-75779-2018 Indexed Journals
SCOPUS SUGGESTED JOURNAL ID: 96H3FH57G8592J26
submitijics@gmail.com
An ISO 7021 : 2008 Certified Journal
A Peer Reviewed/ Referred Journal
VOLUME 5 - ISSUE 3 - MARCH 2018
1. EXPERIMENTAL AND STUDY ON POWER GENERATION USING PIEZOELECTRIC MATERIAL
R.S.Prakash Assistant Professor, J.Raghu Ram, P.Sivagnanasampathan, S.P.Tamilarasan, R.Vijayan Shankar; Hindusthan Institute of Technology, Tamilnadu
Page No:1-4
DOI:16.10089.IJIRE.2018.V5I3.17.1110
2. EXPERIMENTAL STUDY ON BEHAVIOR OF CLUTCH PLATE LINING USING BANANA FIBRE
R.S.Prakash Assistant Professor, M.Gomathishankar, R.Gunaalan, R.Kalaiyarasan, V.Murugesh; Hindusthan Institute of Technology, Tamilnadu
Page No:5-8
DOI:16.10089.IJIRE.2018.V5I3.17.1111
I.Aatthisugan, A.Razal Rose, D.Selwyn Jebadurai; SRM IST, Kattankulathur; R.Karthikeyan, A.Vetrivel; SNS College of Technology, Coimbatore
Page No:9-13
DOI:16.10089.IJIRE.2018.V5I3.17.1112
M. Ramarao Associate Professor, Adesh Bhil Associate Professor, V. B. Manjunath Associate Professor; Holy Mary Institute of Technology and Science, Hyderabad; M.Mathanmohan; Annamalai University, Chidambaram
Page No:14-21
DOI:16.10089.IJIRE.2018.V5I3.17.1113
5. 2.2L ENGINE 1D SIMULATION & EXPERIMENTAL ANALYSIS OF EXHAUST MANIFOLD
Krishnamoorthi.D; Maharaja Engineering College, Avinashi, Tamil nadu; Naveenkumar.M Assistant Professor,
Pravin. T Assistant Professor; SNS College of Technology, Coimbatore,Tamil nadu
Page No:22-26
DOI:16.10089.IJIRE.2018.V5I3.17.1114
6. Review on Influence of Corrosion and cavitation on various materials of diesel engine parts while using Biodiesel as fuel
Narayanan S, Chinnasamy C, Dr.Prakash. T; SNS College of Technology, Coimbatore, Tamilnadu
Page No:27-32
DOI:16.10089.IJIRE.2018.V5I3.17.1115
7. Performance Analysis on Oxygen Enriched Diesel Engine for Various Compression Ratios
Narayanan S, Ragunath. K, Balaji. T, Dr. Prakash. T; SNS College of Technology, Coimbatore, Tamilnadu
Page No:33-38
DOI:16.10089.IJIRE.2018.V5I3.17.1116
8. Turbo Air Conditioning for Automobiles
S.Manikandan Assistant Professor, K.M.Aravindhasamy, T.Akilan, V.Adarsh, R.Aravindhasamy; Sri Shakthi Institute of Engineering and Technology, Coimbatore, Tamilnadu
Page No:39-43
DOI:16.10089.IJIRE.2018.V5I3.17.1117
9. Polymer reinforced palm fibre composite gear: Design, development and testing
Abhishek.S, Godson Sabu, Gowthaman.S, Gughan.D, Manikandan.S; Sri Shakthi Institute of Engineering and Technology, Coimbatore, Tamilnadu
Page No:44-51
DOI:16.10089.IJIRE.2018.V5I3.17.1118
10. AN INVESTIGATION OF STRENGTH ANALYSIS AND MECHANICAL PROPERTIES ON SOLIDS
Mr.C.Manivel, Research Scholar, Anna University & S.Malarvizhi, Assistant Professor, Rathinam Technical Campus
Page No:52-60
DOI:16.10089.IJIRE.2018.V5I3.17.1119
11. DESIGN AND CONSTRUCTION OF DOUBLE PASS SOLAR AIR HEATER WITH JET IMPINGEMENT
Tamil Selvan R Asst. professor, Praveen U, Saravanan A, Selvakannan K, Venkata prasanth D; Sri Ramakrishna Institute of technology, Coimbatore
Page No:61-68
DOI:16.10089.IJIRE.2018.V5I3.17.1120
12. MULTIPLE FRESNEL LENS CONCENTRATIONS ON A DOUBLE SLOPE SOLAR STILL
Dr. P. Vijian Professor, V. Praveen, P. Ravi Shankar, S. Shibi Paul, M. Vijay; Sri Ramakrishna Institute of technology, Coimbatore
Page No:69-74
DOI:16.10089.IJIRE.2018.V5I3.17.1121
13. Design and Fabrication of Organic Fertilizer Spraying Machine
K.Navanitha Krishnan, K. Velmurugan, R.Manikandan; Sri Manakula Vinayagar Engineering College, Pondicherry
M.Subramanian; SNS College of Technology,Coimbatore
Page No:75-80
DOI:16.10089.IJIRE.2018.V5I3.17.1122
14. Design and Fabrication of Automatic Corrugated Partition Box Assembler
R. Manikandan, K. Velmurugan, K.Navanitha Krishnan; Sri Manakula Vinayagar Engineering College, Pondicherry
M.Subramanian; SNS College of Technology, Coimbatore
Page No:81-86
DOI:16.10089.IJIRE.2018.V5I3.17.1123
15. A literature survey on Mechanical properties in Aluminum Matrix Reinforced Composites
Aravinth.B Assistant Professor; Dr. Navalar Nedunchezhiyan College of Engineering Tholudur, Cuddalore
Janagarathinam P Assistant Professor; SNS College of Technology Coimbatore
Dr.Subramanian M Professor; SNS College of Technology Coimbatore
Dr.Velumurugan.k Associate Professor; Sri Manakula Vinayagar Engineering College, Pondicherry
Page No:87-91
DOI:16.10089.IJIRE.2018.V5I3.17.1124
K.L.Senthilkumar, L.Savadamuthu, M.Saravanakumar, M.Sureshkumar; SNS College of Technology, Coimbatore
Page No:92-97
DOI:16.10089.IJIRE.2018.V5I3.17.1125
17. DESIGN FABRICATION AND ANALYSIS OF GEARBOX USING LABVIEW
Umesh B, Udhaya Chandran RM Assistant Professor, Mohan S, Dhanasekar J; Adithya institute of technology, Coimbatore
Page No:98-105
DOI:16.10089.IJIRE.2018.V5I3.17.1126
18. LOW COST MATERIAL HANDLING EQUIPMENT USING PLC
Dr. T. Prakash, R.Gokul, P.Jaya kumar, G.Karthikeyan; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:106-110
DOI:16.10089.IJIRE.2018.V5I3.17.1127
19. DETECTION OF DRIVER FATIGUE BASED ON VISUAL ANALYSIS OF EYE STATE
S.PRABU VENKATESWARAN, J.MERCY,R.LAWANYA,M.NASHREEN BANU; SNS College of Technology, Coimbatore, TN
Page No:111-116
DOI:16.10089.IJIRE.2018.V5I3.17.1128
20. DESIGN AND FABRICATION OF FIXTURE FOR TAPER GRINDING PROCESS
Mr. S. Hemnath, Mr. K. Gowtham, Mr. Balasubramaniyan Tarun, Mr. V. Gopinath, Mr. R. Gowtham; SNS College of Technology, Coimbatore
Page No:117-120
DOI:16.10089.IJIRE.2018.V5I3.17.1129
21. PERFORMANCE ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING WAVE STRIPS
Sangesh R, Prakash K,Vighneshram R, Sreevalsan N M, Rayan A; SNS College of Technology, Coimbatore
Page No:122-129
DOI:16.10089.IJIRE.2018.V5I3.17.1130
22. DESIGN AND FABRICATION OF DOUBLE BRAKING SINGLE LEVER SYSTEM FOR TWO WHEELERS
M.Sureshkumar, G.Dinesh Kumar, D.Jayasurya, R.Jayender, D.Kavin Kumar; SNS College of Technology, Coimbatore
Page No:130-134
DOI:16.10089.IJIRE.2018.V5I3.17.1131
R.Vijay, T.Vishnu , M.Vishnu Vardhan , R.N.Satheesh , Dr.L.Savadamuthu Professor, M.Sureshkumar Assistant Professor; SNS College of Technology, Coimbatore
Page No:135-140
DOI:16.10089.IJIRE.2018.V5I3.17.1132
24. METALLIC SWARF COMPRESSION MACHINE USING PLC
V. Karthick , S. Deepak, C. Devarajan, G. Hariharan, M. Gowtham; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:141-146
DOI:16.10089.IJIRE.2018.V5I3.17.1133
25. INBUILT SUNSHADE CAR COVER
N.Rajiv Kumar Assistant Professor, M. Karthick, S. Maneyarasu, S. Prasanth, S.Prasanth; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:147-150
DOI:16.10089.IJIRE.2018.V5I3.17.1134
26. PERFORMANCE AND ANALYSIS OF SOLAR STILL WITH EVACUATED TUBE
A .Vimal kodeeswaran Assistant Professor, S. Pavinkumar, T. Praveenkumar, G.Premkumar; SNS College of Technology,Coimbatore, Tamil Nadu
Page No:151-154
DOI:16.10089.IJIRE.2018.V5I3.17.1135
27. COMPARATIVE ANALYSIS OF BONE TISSUE USING RAPID PROTOTYPING TECHNOLOGY
Onishi Ponnuchamy, Mohammed Ariffuddeen .M, Naveen .R, Mohammed Azarudeen .S, Khaushik Raja .S; SNS College of Technology,Coimbatore, Tamil Nadu; Kumaresan .T; PSG College of Technology, Coimbatore
Page No:155-160
DOI:16.10089.IJIRE.2018.V5I3.17.1136
28. INCREASING THE PROPERTIES OF H30 ALUMINIUM ALLOY
Surendar V,Prakash K Assistant Professor,RanjithKumar N,Suprashwanthan P, vignesh G; SNS College of Technology,Coimbatore, Tamil Nadu
Page No:161-169
DOI:16.10089.IJIRE.2018.V5I3.17.1137
29. EXERGY ANALYSIS OF BLENDED REFRIGERANT
S. THIVAGAR ANDAVAR, I. RIJOPRAYSON, K. THIRUMARAI SELVAN, M. VIGNESH, C. SENTHILKUMAR Associate Professor; SNS College of Technology,Coimbatore, Tamil Nadu
Page No:170-179
DOI:16.10089.IJIRE.2018.V5I3.17.1138
30. EXPERIMENTAL ANALYSIS OF RECENT REFRIGERANT R134A FOR BETTER COOLING EFFECT USING A TABLE TOP FAN
B.RUBIN RAKESH, V.G.VIDHYAGAR, V.SARANRAJ, K.VIGNESH KUMAR, C.SENTHIL KUMAR Associate professor,
P.TAMILSELVAM; Sns College of technology, sathy main road, saravanampatti, coimbatore
Page No:180-186
DOI:16.10089.IJIRE.2018.V5I3.17.1139
31. DESIGN AND FABRICATION OF AUTOMOBILE SEAT VENTILATION
T. Pravin Assistant Professor, V. Madhankumar, M. Muthukumar, R. Naveen; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:187-189
DOI:16.10089.IJIRE.2018.V5I3.17.1140
32. DESIGN AND FABRICATION OF SECONDARY CABIN COOLING SYSTEM FOR AUTOMOBILE
A.Vimalkodeeswaran Assistant Professor, S.Moulidharan, M.Guruprasad, J.Jayakrishnaraj, V.Kavin; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:190-192
DOI:16.10089.IJIRE.2018.V5I3.17.1141
33. CAM OPERATED GEAR SHIFTING MECHANISM
N. Mohan, N. Ajith, A. Anirudh, P. Arun Prakash, S. Dinesh Kumar; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:193-197
DOI:16.10089.IJIRE.2018.V5I3.17.1142
34. CYCLE TIME REDUCTION IN CNC TURNING FOR SUBMERSIBLE PUMP IMPELLER
A. Natrajan, S. Sabarish, S. Rameshkumar, R. Thilakkumar, R. Sundar; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:198-203
DOI:16.10089.IJIRE.2018.V5I3.17.1143
35. DESIGN AND FABRICATION OF INTELLIGENT FOOTBOARD ACCIDENT PREVENTION SYSTEM
Kirankumar.S, Logesh Babu.M, Mohammed Ibrahim.S, Nandha kumar.S, Selvakumar.J; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:204-210
DOI:16.10089.IJIRE.2018.V5I3.17.1144
36. Optimization of process parameter of turning Aluminium 6061 using FEA, RSM and GA
Mr. Nitish Krishnaa. G, Dr.Subramanian. M, Mr. Pradeep Singh. B, Mr. Nijammaideen. M, Mr. Prabakaran. S; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:211-214
DOI:16.10089.IJIRE.2018.V5I3.17.1145
37. REVIEW ON PROCESSING OF NANO TUBES
C. Somu, S.R. Tamilmaran, G. Sukumar, K. Santhosh Kumar, M. Saravanan; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:215-226
DOI:16.10089.IJIRE.2018.V5I3.17.1146
38. THEORETICAL STUDY OF FLOW MEASURING DEVICE
K. Prakash, N.Sowmiya Bhakavathe, K.Vaishanvi, A. Vennila; SNS College of Technology, Coimbatore,Tamil Nadu
Page No:227-235
DOI:16.10089.IJIRE.2018.V5I3.17.1147
Ganeshkumar. R, Thirunesan.N, Veeramaniraman.N, Tamilselvan.M, Thirumalai.R; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:236-242
DOI:16.10089.IJIRE.2018.V5I3.17.1148
40. Technique to detect and reduce cracks occurring in welding
C. Vasanthakumar, A.R. Sridharan, S. Vijaychandran, R. Sreeju, A. Natarajan; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:243-250
DOI:16.10089.IJIRE.2018.V5I3.17.1149
41. HYBRID BIKE USING LPG AND ELECTRIC BATTERY
R.Ruvanesh, B.Sanjay, R.Vignesh, J.Sriram, R.Karthikeyan; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:251-256
DOI:16.10089.IJIRE.2018.V5I3.17.1150
42. Cycle Time Reduction in CNC Machine of Flywheel Component 852
V.S.Kaushik Assistant Professor, S.Lokesh, N.Nishanth, J.Patrick, B.Sarathy; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:257-261
DOI:16.10089.IJIRE.2018.V5I3.17.1151
43. CHARACTERIZATION OF FRICTION STIR PROCESSED ALUMINIUM-MAGNESIUM ALLOY
Dr. R.Ranjith, ME., PhD, Senthil Kumar .V, Vignesh Kumar.R, Vivek.S.Babu, Suryanarayanan.B; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:262-272
DOI:16.10089.IJIRE.2018.V5I3.17.1152
44. DESIGN AND ANALYSIS OF CONNECTING ROD BY USING COMPOSITE MATERIAL
A.Vetrivel, P.Shankarananth, K.Saravanan, C.Vigneshwaran, D. Rajesh kannan; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:273-280
DOI:16.10089.IJIRE.2018.V5I3.17.1153
45. CAUSES AND REMEDIES OF BLOW HOLES IN SAND CASTING
Natrajan.A,Kartheeswaran.D,Gokul.N,Gokul.E, Gurugururaj.M; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:281-284
DOI:16.10089.IJIRE.2018.V5I3.17.1154
46. SOLAR OPERATING 3-IN-1 AGRICULTURAL MACHINE
Kumaravelsamy.G, Mathan raj.S, Mitun.D, Rahul.R, Selvakumar.J; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:285-290
DOI:16.10089.IJIRE.2018.V5I3.17.1155
47. IMPLEMENTATION OF SIX SIGMA TOOLS IN AUTOMOBILE SERVICE SECTORS
Mr.B.KARTHICK, K.AJAYKARTHIK, M.ANIRUDHYAN, R.KADIGAIMUTHU, T.KATHIRAVAN; SNS College of Technology, Coimbatore, Tamil Nadu
Page No:291-296
DOI:16.10089.IJIRE.2018.V5I3.17.1156
48. EXPERIMENTAL INVESTIGATION ON RECOVERY BOILER FOR THE ENHANCEMENT OF STEAM PROUCTION
Dr P. Tamilselvam, Mr. A.S. Divakar, Mr. V. Gowrisankar, Mr. S. Gowthaman, Mr. N. Jeganathan; SNS College of Technology, Coimbatore, Tamil Nadu; Dr S. Asokan; SRP TNPL, Kagithapuram, Karur.
Page No:297-303
DOI:16.10089.IJIRE.2018.V5I3.17.1157
49. IMPLEMENTATION OF ANTILOCK BRAKING SYSTEM IN TRAIN
Vaithiyanathan; Technician at Southern Railway, central workshop, Golden rock,
Trichy U.Karthick, M.Balakrishnan, R.Arunkumar, S.Ganeshkumar; SNS College of Technology, Coimbatore, Tamilnadu
Page No:304-312
DOI:16.10089.IJIRE.2018.V5I3.17.1157
50. REDUCTION OF BEARING DAMAGE BY CONDITIONAL MONITORING USING ON-BOARD ACCELEROMETER
KISHORE V,KISHOR VP,PREM A,PREMKUMAR P,SURESH KUMAR M; SNS College of Technology, Coimbatore, Tamilnadu
Page No:313-319
DOI:16.10089.IJIRE.2018.V5I3.17.1158
51. MODELLING AND ANLYSIS OF SURFACE ROUGHNESS ON END MILLING OF AL-6061
Dr.M.subramanian, I.Prasanth, K.Praveen; SNS College of Technology, Coimbatore, Tamilnadu
Page No:320-325
DOI:16.10089.IJIRE.2018.V5I3.17.1159
Dr. R. Ranjith, K.Karthikraj, E.Muthukumar, K.R.Manimaran; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:325-328
DOI:16.10089.IJIRE.2018.V5I3.17.1160
53. Model Analysis of Aluminium 7068 Alloy Using End Mill Cutter
Mr. Kaushik.V.S, Mr. Krishnamoorthy.A, Mr. Murugan.V, Mr. Prasanth.R, Mr. Milen S Geever; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:329-333
DOI:16.10089.IJIRE.2018.V5I3.17.1161
54. EXPERIMENTAL INVESTIGATION OF MACHINING OF STAINLESS STEEL USING DRY AND GAS COOLED ENVIRONMENT
S Ramar, Ramesh Pranay, R Revanth, B Sakthivel, M Saravana Kumar; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:334-343
DOI:16.10089.IJIRE.2018.V5I3.17.1162
55. EXPERIMENTAL INVESTIGATION OF MACHINING OF STAINLESS STEEL USING VEGETABLE BASED CUTTING FLUID
Ramvignesh.R, Sabaris.B, Saravanakumar.S, Vishnu.K, Saravanakumar.M; SNS College Of Technology, Coimbatore, Tamil Nadu
Page No:344-351
DOI:16.10089.IJIRE.2018.V5I3.17.1163